CNC Tube Bender Knowledge
CNC Tube Bender Knowledge
Induction Pipe Bending Machine Solution
General FAQ

CNC Tube Bender Knowledge

What is mandrel of pipe bending machine?

When bending steel pipes and aluminum pipes, the mandrel of the pipe bending machine must be used for difficult work. Bending smaller radii, thin tubes or harder materials may cause unsatisfactory results. In these cases, the mandrel may come in handy. The purpose of the mandrel is to prevent the tube from collapsing.

What is wiper die of pipe bending machine?

The wiper die of the pipe bender is placed behind the bending die. The goal is to avoid any bumps on the inner radius.During the molding process, the material becomes plastic during the bending process. May cause large wrinkles and deformation. Therefore, adding a wiper mold after bending the mold helps smooth the surface.

What is press die of pipe bending machine?

The press die of the pipe bender ensures that the pipe follows the contour of the bending die.

What is clamp die of pipe bending machine?

The clamping die of the pipe bender presses the pipe onto the bending die. Its main purpose is to prevent the pipeline from slipping.

What is bend die of pipe bending machine?

The bending die, also called the bending die or the fillet die, is the most important part of the rotary stretch CNC pipe bender. The tube is clamped on the bending die, and the drawing process will produce the necessary bending. The choice of mold is very important because the inner radius of the tube depends on it.

What is minimum bending radius of pipe bending machine?

The minimum bending radius is the minimum allowable radius that the cable can be bent. During the installation process, the cable will bend or bend under various environmental conditions. Cables are usually bent around conduits or underground pipes.

What does the R and L mean on a cnc mandrel tube bender?

Assume that the bending machine is in good condition. Look for the marks "R" and "L", and "0" and "45" on them. If you start measuring from the left and want to bend 90 degrees, tilt 0 and set the measurement mark on "L". If you start measuring from the right, add "R".

What is hydraulic pipe bending machine?

We provide high-quality hydraulic pipe benders. These are motor-driven, used for large-radius large-size ERW elbows, very suitable for "C" size 3/8" to 6" gas, water, steam DIN 2440/2441, maximum bending 90 degrees. 40 on request. The provided tube bender array is widely used.

How does a pipe bending machine work?

This is the most common type of pipe bender. First, the machine operator uses the clamping die to fix the pipe or pipe to the machine. Then, the bending mold starts to rotate around its axis. At the same time, fixing the pressure mold ensures that the tube follows the radius of the bending mold.

What is straights between bends of CNC mandrel tube bender?

If your part requires multiple elbows, then we will need a minimum straight length between the two elbows. This is also called the clamp length. Using our tool list, you can see the minimum clamp length of any size tube and the related centerline radius bending mold from our inventory tools.

What is degree of bend of CNC pipe bender?

Bend angle. This is on the outside of the bend

What is wall thickness (W/T) of tube bending machine?

The size between the pipe or the inner and outer surfaces.This is also called a piping plan or piping specification.

What Is outside diameter (O/D) of pipe bending machine?

Measurement of the widest area of a pipe or tube

What is tube bending machine processes?

Mandrel bendingThe tube is bent around a fixed radius mold and a mandrel is inserted to prevent it from collapsing during the bending process. The tube or tube is tightly leaned on the mold and then rotated while the pressure mold moves in a straight line. See our mandrel bending video for a brief overview. This is the most common form of bending.Roll forming (rolling)The pipe is rolled by three rollers to form a larger centerline radius. Please watch our scrolling video for a brief overview.Compression bendingCompression molding is the original technology of bending pipes. Clamp the tube in place and move the pressure die along the radius to form a bend, which is the opposite of mandrel bending. This method does not allow the use of mandrels.