- Issue Time
Double head hydraulic pipe bender plus numerical control module, digital display touch screen, simple program setting, dialogue operation
Double-head hydraulic pipe bender plus numerical control module, digital display touch screen, simple program setting, dialogue operation; active homing function, patented pipe rotating fixture, and the screen has the function of expanding the current view point value of the rotating pipe . Each gear can set 16 manual turning pipe viewpoints and 16 active pipe bending viewpoints. The memory can store 40 groups of pipe bending methods; the repeatability of the pipe bending is ±0.1°; the viewpoint accuracy of the turning pipe is ±0.2°. The error message is A flashing on the flashing screen helps the operator to clean immediately; the sinking clamp prevents the feeding and the pipe from being dry. Provide self-developed software for coordinate conversion of bending pipe processing values, and optional equipment to correct and calculate on a desktop computer.
The control system of this fully active pipe bender is divided into general PLC type and contact numerical control type, which can be selected flexibly. This model is a revolving type, and the viewpoint of the nose can be adjusted according to production requirements. Various functions such as manual, active, semi-circular, full-circle, etc. can be selected at will. Controlled by PLC, imported electrical components, the user program does not need to be equipped with a battery, and will never be lost. Movable foot switch, with three functions of active suggestion, eager interruption and immediate stop, high performance. The two sets of heads can be separated or operated together. Different tortuous radii can also be processed together, suitable for wide planning. Strong bending capacity and processing. Multiple pieces can be processed together, cyclic operation, high efficiency. The appearance is exquisite, the planning is simple, and it provides space for bending pipes. The space-corner head can be processed by 90 degrees inside and outside, which makes the processing more flexible and the bending planning is more extensive.
When equipment, the elbow can be directly connected to the pipeline according to the connection method, and the equipment can be installed according to the application direction. Under normal circumstances, the equipment can be placed in any position of the pipeline, but it needs easy-to-operate inspection. Note that the flow direction of the cut-off elbow should be upward from the vertical valve flap, and the intermediate frequency elbow can only be the equipment. The elbow of the double-head hydraulic pipe bender must be careful when using it. It is easy to leak and affect the normal operation of the pipeline.